post-facelift pre-facelift VASTI VAWRX
b_code, e_family
Compatible with car:
post-facelift pre-facelift VASTI VAWRX
b_code, e_family
US Subarus come with a little square panel in the back bumper, but unlike cars in Japan and other cool places, we don't get a lamp back there. You can fix that! This LED rear brake lamp fits directly in that little space where the panel is. Easy wiring allows you to wire it in to the existing brake lamp circuit.
Now available with a plug-in wiring harness for a small additional cost. Note that the harness wire colors and car wire colors may vary, but the basic idea is to have the black wire on the lamp wired to ground, and the green and red wires on the lamp both wired to the brake lamp circuit on the car. Depending on your vehicle, you MAY HAVE TO RE-PIN THE HARNESS. You also will have one or more extra leads you don't need to use. Use any multimeter if you're not sure what wire is what.
Also understand that this lamp has only ONE brightness level. For that reason we recommend it as a brake lamp only. It does not have a dim/bright output option, so it cannot be used as a rear fog lamp/brake lamp combo.
The lamp does have a clever blinking function when it first switches on to attract extra attention.
Kit includes LED lamp, mounting bracket, and wiring.
Please be aware of and obey all local laws regarding automotive lighting. We make no claims about the legality of this part in your part of the world.
Fits all 2015-2021 Subaru WRX and WRX STI.
SKU#: 10751RE, 10751SM, K10751REVA, K10751SMVA
Shipping Weight: 3.0 lb
Supplier: Mach V Motorsports
Category: Exterior Lighting
Installed in a 2011 Sti sedan. Plug and play harness is not needed along with mounting bracket. Does not come with wiring instructions but a simple Google search will show you how. Install took about an hour. Looks nice and bright
Looks great, works great! Took about 15 minutes to install. I don't like unsheilded wires, so I heat shrunk the wires for a little extra protection and cleaner looking install. Clips supplied with kit, but you will need to put the flat side of the clip on the inside of the light opening so you will have room for the light to slide in all the way.
Looks great, works great! Took about 15 minutes to install. I don't like unsheilded wires, so I heat shrunk the wires for a little extra protection and cleaner looking install. Clips supplied with kit, but you will need to put the flat side of the clip on the inside of the light opening so you will have room for the light to slide in all the way.
Looks great, works great! Took about 15 minutes to install. I don't like unsheilded wires, so I heat shrunk the wires for a little extra protection and cleaner looking install. Clips supplied with kit, but you will need to put the flat side of the clip on the inside of the light opening so you will have room for the light to slide in all the way.
We will send a verification email to confirm your question. All questions are subject to store approval.
We will send a verification email to confirm your review. All reviews are subject to approval. Personal information like emails are private and will never be shared.
We will send a verification email to confirm your answer. All responses are subject to store approval.